Structure Characterization of HSQ Films for Low Dielectrics Using D5 as Sacrificial Porous Materials

Low-density materials, commercially available hydrogensilsesquioxane （HSQ） offer a low dielectric constant. HSQ films can be obtained by spin on deposition （SOD）. In this work, low-dielectric-constant HSQ films are prepared by using D5 （decamethylcyclopentasiloxane） as sacrificiaJ porous materials. The dielectric constant of silica films significantly changes from 3.0 to 2.4. We report the structural aspects of the films in relation to their composition after annealed at 300℃, 400℃, and 500℃ for 1.5h in nitrogen ambient and annealed at 400℃ for 1.5h in vacuum. Si-OH appears after annealed at 400℃ for 1.5h in vacuum. The results indicate that the proper condition is in nitrogen ambient. Intensity of the Sill peak increases with the increasing temperature. Fourier transform infrared spectroscopy is used to identify the network structure and cage structure of Si-O-Si bonds and other possible bonds. Dielectric constant k is significantly lowered by annealing at 350℃ for 1.5h in nitrogen ambient. The I-V and C-V measurements are used to determine the dielectric constant, the electric resistivity and the breakdown electric field.     

多点侧面泵浦双包层光纤激光器的对称夹层结构

 利用基于亚波长衍射光栅理论的介质-金属-介质的对称夹层结构,对掺杂的双包层光纤进行多点泵浦，根据严格的电磁场衍射理论和光栅方程，分析了多点泵浦时，这种耦合结构的泵浦光泄露的问题，证明了多点泵浦时泵浦光的泄露率仅为15.52%，而对信号光则不存在泄露。这种对称夹层结构可以用于多个大功率激光二极管阵列的多点侧面泵浦双包层掺杂光纤中，以制作各种大功率(数kW级)稀土光纤激光器，其最大耦合效率可以达到80%以上。     

强光一号装置单氘丝中子发射实验研究

 介绍了利用飞行时间技术测量Z箍缩装置单氘丝中子发射。实验发现，Z箍缩中子发射过程中,伴随产生很强的硬X射线，利用铝丝阵产生硬X射线的实验，建立较好的硬X射线屏蔽,大大减弱了它的辐射强度。所采用的双闪烁探测器中子探测系统，进行了3个发次的单氘丝负载实验，确认产生了聚变氘氘中子。4172发次实验测量结果表明，中子产额1.5×10⁹，中子能量为(2.45±0.26) MeV。实验结合分幅照相数据分析认为，峰电流和负载未能很好匹配，等离子体存在不稳定现象。     

大功率光纤放大器分段泵浦方式下的理论分析

利用数值算法计算了掺镱双包层光纤放大器分段泵浦方式下的稳态速率方程组,分析比较了双端泵浦和多段泵浦方式下的最佳光纤长度,最高温度和效率,并采用遗传算法对分布泵浦功率的大小和每段光纤长度同时进行了优化。结果表明,通过优化,大功率分段泵浦光纤放大器获得了较为平坦的温度分布,与双端泵浦相比,大大降低了最高工作温度,斜率效率略有下降。     

基于傅立叶变换的射频场分布测量方法

提出了一种基于傅立叶变换的射频场分布测量方法，该方法可以方便地测量出射频场的分布，其测量结果与样品的均匀度无关并且可以分别观测某个像素点处的层内射频场非均匀性或某个小区域内的射频场非均匀性.     

南开大学奇异性核物理的理论研究

简要介绍了南开大学核物理组在奇异性核物理方面的理论研究工作. 已经完成的工作有核介质内超子平均自由程的理论计算, 奇异性核物理方面已完成的其他4个理论研究课题是, 不同重子杂质对原子核的影响、重味重子超核、核物质内的eta-介子以及K介子原子核的性质.     

Teleportation of an n-bit one-photon and vacuum entangled GHZ cavity-field state

A scheme for teleporting an arbitrary n-bit one-photon and vacuum entangled Greenberger-Horne-Zeilinger （GHZ） state is proposed. In this scheme, the maximum entanglement GHZ state is used as a quantum channel. We find a method of distinguishing four Bell states just by detecting the atomic states three times, which is irrelevant to the qubit number of the state to be teleported.     

Well Crystallized α-GaOOH Nanocrystals Synthesized through Hydrothermal Routes and Their Properties

A facile hydrothermal process involving Ga(NO₃)₃·H₂O·NaN₃ solutions led to the formation of α‐GaOOH nano‐platelets. X‐ray diffraction (XRD) pattern revealed that the synthesized samples belonged to an orthorhombic crystal structure with lattice constants a=0.4510 nm, b=0.9750 nm and c=0.2965 nm. Transmission electron microscopy (TEM) studies showed that α‐GaOOH displayed the morphologies of an eccentric platelet‐like structure with 60–120 and 200–300 nm in the short and long axes, respectively. The average thickness of products was about 70 nm through scanning electron microscopy (SEM) images. The ultraviolet absorption of the samples was at 214 nm. The prepared α‐GaOOH nano‐platelets exhibited a broad emission band from 220 to 400 nm with a maximum at 343 nm under short UV excitation of 200 nm. Fourier transform infrared (FTIR) spectrum confirmed the existence of Ga₂O and Ga–OH bending modes. A possible mechanism for the formation of α‐GaOOH nano‐platelets was discussed briefly.     

辅酶Q10及其杂质结构鉴定

辅酶Q10是1975年初次从牛心肌中分离而得的一种脂溶性结晶,属泛醌类化合物.具有提高人体免疫力,增强抗氧化能力,延缓衰老等功能.可用于心血系统疾病、肝病等辅助治疗.近年来,国内外也将辅酶Q10广泛用于营养保健品及食品添加剂.     

增韧环氧树脂的动态裂纹扩展研究

本文主要进行了环氧及增韧环氧树脂的断裂韧性及裂纹快速扩展的试验研究。试验过程中采用了ＧＬＣ－１型高速裂纹扩展测试仪来测试裂纹的扩展速度,得到在裂纹扩展过程中裂纹扩展速度曲线。本文结合不同的计算公式及有限元分析方法,讨论了各个确定断裂韧性公式的准确程度,发现传统的静态断裂韧性的分析方法所得到的结果偏大,有一定的危险性,建议使用试验与数值计算相结合的方法;同时还发现增韧不仅可以提高材料的静态和动态断裂性能,而且在裂纹扩展过程中可以起到减缓裂纹扩展的作用